Pages

Sunday, March 19, 2017

ImPRESSive Putty

Hi Friends,

On my work table today is a product new to me.  As I was wandering the aisles at the Creativation show, I stopped to talk to the folks at ComposiMold and they kindly sent me a sample of their unique ImPRESSive mold-making putty.  It's unique because 1) you don't have to mix it like most mold-making putty and 2) it's re-usable!

I followed the instructions on the back of the product to heat the Impressive Putty.  While it was cooling, I searched for some items to mold.

The first thing I tried was an old key.  I pressed the key into the putty and put it into the freezer for 15 minutes. 

Then, I popped out the key by flexing the mold.

I used Delight(TM) air dry modeling compound to fill the mold.
I waited about 15 minutes and took it out of the mold.  I used a lot more of the paper clay than I needed, but I should be able to trim that away fairly easily.  The next time, I added a little water to the paper clay to make it more flexible and added less to the mold. 

In all, I made three paper clay keys.  They should be fun to add to a mixed media collage or a card later.
Next, I tried some resin in the key mold.  I added a few drops of brown alcohol ink to color the resin.
I added a little too much resin, so I had to clean up the key with a file.

Then, I created a simple lariat with leather lace.  I wrapped the key with wire and beads and added it to the ends of the lace with a metal keyhole, beads and other assorted items..

Here's a photo of the ends of the lariat.
Wrapped Key Lariat
And, so, since it's a re-usable putty, I heated it up and kneaded it and made another mold.  This time I used a stone donut. 
Mold #2
I found this ImPRESSive Putty very easy to use and I look forward to using it more in my design work.  You can find it at the ComposiMold website along with many more of their re-usable mold-making materials.  You'll find a product for everything you want to mold - even food! 


Tuesday, March 14, 2017

Etched Slate Sign

Hi Crafty Friends!

I'm back from a road trip to Arizona where I saw many amazing sights like the Grand Canyon, the Petrified Forest and the Painted Desert.  Among the many fascinating things I saw were petroglyphs.  These are ancient drawings carved into the rock in many places around the world.  These petroglyphs inspired the slate sign I etched here.

I received some new materials from etchall® for this blog hop and I was eager to try them out.  One item was a etchall® resist gel to use with etchall® etching crème.

After studying the petroglyphs, I chose a simple sun as a motif on a slate sign.  I drew my own image with a circle and rays.

Here it is drawn with pencil on the slate.  You can erase whatever pencil marks that are left later.

I used the resist gel and went over the pencil lines.

Then, I let it dry until it was clear.  Using a toothpick, I filled the ring and rays with etching crème.

After fifteen minutes, I rinsed off the etching crème.  Ordinarily, I'd scrape off the etching crème and return it to the bottle, since it is re-useable.  But, in this case, I used very little crème.  Once the crème was rinsed off, I pulled of the resist gel. 

Here's the result:

I liked the look of the primitive sun on the rough slate, but I thought it needed a little more.  So, I added some smaller petroglyph motifs on both sides.
I drew the motifs with pencil, then used a toothpick dipped into the etchall® etching crème and went over the lines.  After 15 minutes, I rinsed them quickly under running water.

Here's the final result of my etched slate sign:
Etched Slate Sign

Etched Slate Sign
Here it is again showing the great etchall® product used in this project.  I hope you'll try it because it is fun and easy to use with easy clean-up and very little odor.  This is the first time I have used the etchall® resist gel, and I really like how it works on a rough, uneven surface like the slate.  I have tried stencils before on slate and the resist gel works much better.

Take a look at all the other designer's etched projects for this blog hop.  You can find them all on the Designer Crafts Connection Blog.


Wednesday, March 8, 2017

National Craft Month

Hi Crafty Friends!

March is National Craft Month and I'm going to celebrate this month with some ideas and inspiration for you. 

Here's a few ideas from the Creating With Joy blog.  It's almost St. Patrick's Day, so here is a cute banner from Julie McGuffee:  St. Patrick's Day Banner

St. Patrick's Day Banner
Also from the Creating with Joy blog, my Children's Felt Bulletin Board.  It's simple to make with that wonderful felt from Kunin, some Duck Tape and Joy Iron-on Letters.
Children's Felt Bulletin Board
Joy Iron-on letters can be ironed onto most surfaces with a craft iron or glued onto those surfaces where you can't use an iron.

Here's a craft that I did in February for the Creating with Joy blog.  We're expecting a granddaughter this month, so I created a small garland for the baby's room.  This time I used stiffened felt, some tulle ribbon and, of course, Joy letters!

Baby Onesie Garland
And, in January, I was thinking snow!  Maybe I thought a little too hard!  There is a lot of it around this year!

Here's the easy garland I created for January:
Let It Snow Garland
These letters are adhered to sparkling foam snowflakes.  It's easy to adapt for any occasion by cutting or buying die cuts and adding Joy letters.  You can find them in craft stores like Michaels or Hobby Lobby or on their website.

Hope you are inspired to create!