Pages

Friday, August 4, 2017

Grape Cluster Pendant

Hi Crafty Friends,

As fall approaches, our family's thoughts turn to harvest.  We are grape growers, and this is the time of year when our crop ripens and is picked.  We watch the weather reports and the sky with increasing frequency as all farmers do.  We check the leaves for molds and test the grapes for ripeness.

So, with grapes on my mind and picking fast approaching, I decided to make a grape cluster pendant. 
Grape Cluster Pendant

To create this pendant, I am using etchall® dip 'n etch and some clear beads that I purchased at my local craft store.

I bought a variety of sizes in clear glass.  They are strung on plastic line, so I just removed the labels and taped them to the sides of a plastic container.  The tape is for me to use to lift them out of the solution.
Now, I can add the etchall® dip 'n etch to the container covering the beads. 
As you see, my etchall® dip 'n etch has darkened with time and use.  But, it still works perfectly.  After etching my beads for 15 minutes, I pulled them out and rinsed them off in running water.  Then, I returned the dip 'n etch liquid to the jar for another use.

Here are my beads after etching:
Etched Beads
They have a matte finish now with a "tooth" that makes them easy to color with paint or ink.  Today, I'm using some of Lisa Maria Jimenez' new line of inks from Clearsnap - ColoriQue.  She recently sent me some samples that I am happy to be able to use for this, especially since she sent me the perfect color for this project - Grape Vine.
I put the etched beads in a small plastic recycled container and added a few drops of the ColoriQue.
Using the paintbrush, I rolled the beads around in the ink to coat them.  Then, I took them out of the dye, patted off the excess and heat set them according to the instructions.
Here are those clear glass beads now - wonderfully purple - and ready to turn into a bunch of grapes!

To start the pendant, I created bead dangles by sliding the beads onto brass headpins and making simple loops.  Here they are arranged along the piece of chain to which I will attach them.
You can add more or less depending on how full you want your pendant.  Generally, attach the smallest beads at the lower end of the pendant and larger near the top, but mix it up a bit to create a more realistic bunch of grapes.  Make sure your chain is large enough to attach two dangles in a link.  After arranging, open a loop on a dangle, slide it into a link and close the loop. 

Here's my pendant after attaching my dangles:
Grape Cluster Pendant
I thought it needed a couple of leaves and found some acrylic grape leaves in my beads.  They needed some definition, so I added a little ColoriQue to them with a brush.  Then I attached them with jump rings to the top of the bunch.

Grape Cluster Pendant


Etching is so easy with etchall® dip 'n etch.  Check the etchall website for the latest specials and all the supplies needed for etching.

(I am a proud member of the etchall Ambassador design team and receive compensation and product for my design use.)

7 comments:

  1. love how etchal allows you to make your own canvas from just about anything. beautiful

    ReplyDelete
  2. whoah this welog is great i love studying your posts.

    Keep up tthe great work! You already know, lots of people are hunting around for this information, you could help them greatly.

    ReplyDelete